top of page
Martin EXTERIOR WASH 120/220 DEMO CASE, US vers
Overview
 
Exterior™ Wash 120 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 120 is designed for variable color temperature (2700K-6500K) applications and is based on separate 2700K and 6500K LEDs
  • Variable color temperature control with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display
 
Features
  • Powerful LEDs (2700K, 6500K)
  • Up to 2400 lumens at full white
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control

Martin EXTERIOR WASH 120/220 DEMO CASE, US vers

$6,931.97Price
    • Physical
      • Length: 240 mm (9.5 in.)
      • Width: 198 mm (7.8 in.)
      • Height: 257 mm (10.2 in.)
      • Weight: 5.0 kg (11.1 lbs.)
    • Dynamic Effects
      • Color temperature control: 2700 K - 6500 K
      • Intensity: 0 - 100%
    • Control and Programming
      • Control systems: DMX, RDM
      • Setting, addressing, standalone programming: Control panel with OLED display
      • DMX channels: 3-5 depending on DMX mode
      • Receiver: RS-485
      • Firmware update: Serial upload via DMX link
      • DMX compliance: USITT DMX512-A
      • RDM compliance: ANSI/ESTA E1.20
    • Optics
      • Light source: 2700 K and 6500 K LEDs
      • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
      • LED manufacturer: Cree
      • Beam Angle Options:
        • No diffuser: 7.5°
        • Narrow diffuser: 11.5°
        • Medium diffuser: 22°
        • Wide diffuser: 50°
        • Very wide diffuser: 60°
        • Asymmetric diffuser: 61° x 15°
      • *Figure obtained under manufacturer's test conditions
    • Photometric Data
      • Total luminous output: 2400 lumens
    • Construction
      • Housing: Cast aluminum
      • Color: Light grey (white, black or other colors available on request)
      • Ingress protection rating: IP66
      • Surface treatment: Anodized and electrostatic powder-coated
      • Effective Projected Area (EPA): 0.05 m² including snoot
      • Impact resistance: IK08 (with display panel cover plate installed)
      • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
      • RoHS compliant
    • Installation
      • Mounting: Adjustable yoke
      • Orientation: Any
      • Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    • Connections
      • Power connection: 1.8 m (5.9 ft.) cable tail without connector
      • Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm
      • Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm
      • Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
      • All cable entries: IP68 cable gland
    • Electrical
      • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
      • Power supply unit: Integrated, auto-sensing multi-voltage
      • Power Consumption: 5 W (steady state, all LEDs at zero intensity)
      • Typical half-cycle RMS inrush current: 9.7 A
      • Maximum total power consumption: 50 W
      • Surge protection: 4 KV
    • Typical Power and Current
      • 100 V, 60 Hz: 0.45 A, 43 W, PF 0.99
      • 120 V, 60 Hz: 0.36 A, 43 W, PF 0.99
      • 230 V, 50 Hz: 0.2 A, 43 W, PF 0.97
      • 277 V, 60 Hz: 0.2 A, 43 W, PF 0.90
      • Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    • Thermal
      • Cooling: Convection
      • Maximum ambient temperature (Ta max.): 45° C (113° F)*
      • Minimum ambient temperature (Ta min.): -30° C (-22° F)**
      • Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
      • Total heat dissipation (calculated, +/- 10%): 160 BTU/hr
      • *Above this temperature, the fixture regulates output to protect from overheating
        **Power must be maintained below -20° C (-4° F)
bottom of page