top of page
Martin VDO Sceptron 40 1000mm in cardboard
Overview
 
The VDO Sceptron 40 is a linear outdoor-rated LED video fixture for the rental market with 40 mm pixel pitch and an extensive range of optical accessories for a wide variety of looks. The VDO Sceptron 40 is driven by the Martin P3 System Controller family for easy configuration, mapping and setup, and is also backwards compatible with DMX for smaller setups. The integrated power and data cabling allows for long daisy-chains with many fixtures per cable-run, while the power supply can be located backstage (up to 50 m away) for a clean setup avoiding messy cabling and several driver boxes. 
 
Features
 
  • 40 mm pixel pitch
  • 62 cd per meter calibrated
  • 187 lumen per meter calibrated
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
  • Available in lengths of 1000 mm and 320 mm

Martin VDO Sceptron 40 1000mm in cardboard

$608.74Precio

  • Physical

    • Length: Available in 320 mm (12.6 in.) and 1000 mm (39.4 in.) versions
    • Width: 27 mm (1.07 in.)
    • Height: 28 mm (1.10 in.)
    • Weight: 1.2 kg / m (0.81 lbs. per foot)

    Control and Programming

    • Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
    • Control modes: RGB, basic, segment and pixel-level
    • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
    • Protocol detection: Automatic
    • Setting and addressing: P3 System Controller or RDM-compliant controller
    • DMX channels: 3/10/13/22/31/82
    • Color and intensity calibration: Pixel-level
    • Firmware update: Via Martin P3™ System Controller
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20

    Control/User Interface

    • Device status: Multi-color visual indication
    • Device test and reset: Magnetic pushbutton to call up local test patterns and reset device

    Optics

    Options:

    • Open Front
    • Flat Diffuser
    • Flat Smoked Diffuser
    • Round Diffuser
    • Round Smoked Diffuser
    • Square Diffuser (supplied as standard with fixture)
    • Square Smoked Diffuser
    • Tube Diffuser
    • Tube Smoked Diffuser
    • NoBlend Diffuser
    • Smoked NoBlend Diffuser
    • Asymmetric (Wall-Washing) Lens
    • All options can be interchanged at any time.
    • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
    • *Figure obtained under manufacturer’s test conditions.

    Photometric Data

    • Color resolution: 16 bits per color (48 bits per pixel)
    • Pixels: 25 per meter
    • Pitch (pixel center-to-center): 40.00 mm
    • Luminous intensity, calibrated mode: 62 cd per meter*
    • Viewing angle: 120° x 120°
    • Total output, calibrated mode: 2,083 nits (modules spaced 30 mm center-to-center)*, 187 lumens per meter*
    • *Preliminary data, figures are approximate.

    Video Processing

    • Brightness control
      Gamma correction and control
      Color temperature control
      Color space control
      Calibration processing
      Synchronization

    Signal Protocol

    • Martin P3 (via Martin P3™ PowerPort) or DMX

    Construction

    • Color: Matte black
    • Base: Extruded aluminum profile
    • Protection rating: IP65
    • RoHS compliant

    Installation

    • Mounting: Slot for locking nuts on back of profile (M6) and optional sliding bracket for M12 bolt
    • Mounting options: Flat surface at any angle, pedestal or other suitable support
    • Orientation: Any

    Connections

    • Power and data input: 6-pin custom (BBD) IP66-rated
    • Power and data thru: 6-pin custom (BBD) IP66-rated
    • Hot plugging compatible

    Electrical

    • Nominal input voltage: 48 VDC +/- 4%
    • Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Tripix™ Power or generic 48 VDC PSU
    • Total power consumption (at maximum intensity, full white): 8.5 W per meter

    Thermal

    • Cooling: Convection
    • Maximum ambient temperature (Ta max.): 55° C (131° F)
    • Minimum ambient temperature (Ta min.): -30° C (-22° F)
    • Total heat dissipation (calculated, +/- 10%): 30 BTU/hr per meter

    Approvals

    • EU safety: EN 60950-1, EN 60950-22, EN 62471
    • EU EMC: EN 55032, EN 55024
    • US safety: UL 60950-1, UL 60950-22
    • US EMC: FCC Part 15 Class A
    • Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
    • Canadian EMC: ICES-003 Class A
    • Australia/NZ: RCM

    1000 mm modules

    • VDO Sceptron Flat Diffuser, 1000 mm: P/N 91610112
    • VDO Sceptron Flat Smoked Diffuser, 1000 mm: P/N 91610114
    • VDO Sceptron Round Diffuser, 1000 mm: P/N 91610116
    • VDO Sceptron Round Smoked Diffuser, 1000 mm: P/N 91610118
    • VDO Sceptron Square Diffuser, 1000 mm: P/N 91610120
    • VDO Sceptron Square Smoked Diffuser, 1000 mm: P/N 91610122
    • VDO Sceptron Tube Diffuser, 1000 mm: P/N 91611640
    • VDO Sceptron Tube Smoked Diffuser, 1000 mm: P/N 91611660
    • VDO Sceptron 10 NoBlend Diffuser, 1000 mm: P/N 91610127
    • VDO Sceptron 10 NoBlend Smoked Diffuser, 1000 mm: P/N 91610129
    • VDO Sceptron 20 NoBlend Diffuser, 1000 mm: P/N 91610131
    • VDO Sceptron 20 NoBlend Smoked Diffuser, 1000 mm: P/N 91610133
    • VDO Sceptron 40 NoBlend Diffuser, 1000 mm: P/N 91610135
    • VDO Sceptron 40 NoBlend Smoked Diffuser, 1000 mm: P/N 91610137
    • VDO Sceptron Asymmetric Lens, 1000 mm: P/N 91611680
bottom of page