Overview
The VC-Strip family of narrow LED video strips is ideal for integration of video into stage and set designs, interiors, custom set elements and more. VC-Strips are fully pixel-level calibrated on brightness and colors for optimal uniformity and quality and are driven by Martin’s award-winning P3 System Controller family for smooth playback that outperforms any DMX-based system. VC-Strips are available in various lengths and can even be cut to required length on-site.
Features
- 16/8 individually controllable pixels
- 30 mm pixel pitch
- 2750 nits of brightness
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Combined power/data thru (to daisy-chain up to 45 VC-Strip 30s)
- Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
- Length of VC-Strip can be customized on-site (simple cutting) to fit integration needs
Martin VC-Strip 8x1 30 RGB (sold in multiples of 20) VC-Strip 8x1 30 RGB
Physical
· VC-Strip 32x1 15™:
Length: 480 mm (18.9 in.) *
Width: 19 mm (0.8 in.)
Height: 15 mm (0.6 in.)
Weight: 51 g (0.12 lbs.)· VC-Strip 16x1 15™:
Length: 240 mm (9.5 in.) *
Width: 19 mm (0.8 in.)
Height: 15 mm (0.6 in.)
Weight: 31 g (0.07 lbs.)· *Including 1 mm board-to-board gap
Control and Programming
· Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX
· Control modes: Pixel and module
· Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
· Protocol detection: Automatic
· Setting and addressing: P3 System Controller or RDM-compliant controller
· DMX channels: Pixel mode 16x1 model = 48, 8x1 model = 24; Module mode (all models) = 3
· Color and intensity calibration: Pixel-level
· Firmware update: Via P3 System Controller
· DMX compliance: USITT DMX512-A
· RDM compliance: ANSI/ESTA E1.20
Control/User Interface
· Device status: Multi-color visual indication
· Device test and reset: Pushbutton to call up local test patterns and reset device
Optics
· Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
· *Figure obtained under manufacturer´s test conditions
Photometric Data
· Pixels: 16/8 per module
· Luminous intensity, calibrated mode: 2750 Nit
· Viewing angle: 120° x 120°
· Preliminary data, figures are approximate.
Video Processing
· Brightness control
Gamma correction and control
Color temperature control
Color gamut control
Calibration processing
SynchronizationConstruction
· Base: Black FR4 circuit board
· Protection rating: IP20
· RoHS compliant
Installation
· Mounting: Mounting holes in module
· Orientation: Any
· Maximum number of VC-Strip™ 16x1 30 modules per daisy-chain: 45
· Maximum number of VC-Strip™ 8x1 30 modules per daisy-chain: 63
Connections
· Power & data input: 4-pin Molex connector
· Power & data thru: 4-pin Molex connector
Electrical
· Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU
· Peak power consumption (at full intensity, full white): 16x1 model 8 W; 8x1 model 4 W
· Typical power consumption (with typical video content): 16x1 model 3 W; 8x1 model 1.5 W
· Figures for typical video content are indicative only and will vary. Power consumption figures include cable and assume a 50 m chain
Thermal
· Cooling: Convection
· Maximum ambient temperature (Ta max.): 45° C
· Minimum ambient temperature (Ta min.): -20° C
· Peak heat dissipation (calculated, at full intensity, full white): 16x1 model 28 BTU/hr.; 8x1 model 14 BTU/hr.
· Typical heat dissipation (calculated, with typical video content): 16x1 model 11 BTU/hr.; 8x1 model 5.5 BTU/hr.
· Figures for typical video content are indicative only and will vary.
Approvals
· EU safety: EN 60950
· EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
· US safety: ANSI/UL 60950-1
· Canadian safety: CSA C22.2 No. 60950-1