Overview
The VC-Grid 60 is an ultra-light-weight LED video module with a 60 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling.
Features
- 64/16 individually controllable pixels
- 750 nits of brightness
- High-quality 16-bit per color image processing technology
- Pixel-level brightness and color calibration for optimal image quality
- P3/DMX controllable (automatic protocol detection)
- Intuitive mapping and addressing via P3 System Controller
- Combined power/data input (single cable for power and data input)
- Combined power/data thru (to daisy-chain multiple VC-Grids)
- Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
- Custom designs available on request (pixel pitch and module dimensions)
Martin VC-Grid 4x4 60 RGB (sold in multiples of 4) VC-Grid 4x4 60 RGB
Physical
· VC-Grid 8x8 60™:
Length: 480 mm (18.9 in.) *
Width: 480 mm (18.9 in.) *
Height: 15 mm (0.6 in.)
Weight: 500 g (1.1 lbs.)· VC-Grid 4x4 60™:
Length: 240 mm (9.5 in.) *
Width: 240 mm (9.5 in.) *
Height: 15 mm (0.6 in.)
Weight: 123 g (0.3 lbs.)· *Including 40 mm (1.6 in.) board-to-board gap
Control and Programming
· Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX
· Control modes: Pixel and module
· Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
· Protocol detection: Automatic
· Setting and addressing: P3 System Controller or RDM-compliant controller
· DMX channels, 8x8 model: 192 (pixel mode) or 3 (module mode)
· DMX channels, 4x4 model: 48 (pixel mode) or 3 (module mode)
· Color and intensity calibration: Pixel-level
· Firmware update: Via P3 System Controller
· DMX compliance: USITT DMX512-A
· RDM compliance: ANSI/ESTA E1.20
Control/User Interface
· Device status: Multi-color visual indication
· Device test and reset: Pushbutton to call up local test patterns and reset device
Optics
· Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
· *Figure obtained under manufacturer's test conditions.
Photometric Data
· VC-Grid 8x8 60™ : Pixels per module: 64
· VC-Grid 4x4 60™ : Pixels per module: 16
· Luminous intensity, calibrated mode: 750 nit
· Viewing angle: 120° x 120°
· Preliminary data, figures are approximate
Video Processing
· Brightness control
Gamma correction and control
Color temperature control
Color gamut control
Calibration processing
SynchronizationConstruction
· Base: Black FR4 circuit board
· Transparency through module (unmasked area): 8x8 models 49%, 4x4 models 53%
· Protection rating: IP20
· RoHS compliant
Installation
· Mounting: Mounting holes in module
· Orientation: Any
· Maximum number of VC-Grid™ 8x8 60 modules per daisy-chain: 12
· Maximum number of VC-Grid™ 4x4 60 modules per daisy-chain: 45
Connections
· Power & data input: 4-pin Molex connector
· Power & data thru: 4-pin Molex connector
Electrical
· Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU
· Peak power consumption (at full intensity, full white): 8x8 model 30 W; 4x4 model 8 W
· Typical power consumption (with typical video content): 8x8 model 10 W; 4x4 model 3 W
· Figures for typical video content are indicative only and will vary.
Thermal
· Cooling: Convection
· Maximum ambient temperature (Ta max.): 45° C
· Minimum ambient temperature (Ta min.): -20° C
· Peak heat dissipation (calculated, at full intensity, full white): 8x8 model 105 BTU/hr.; 4x4 model 28 BTU/hr.
· Typical heat dissipation (calculated, with typical video content): 8x8 model 35 BTU/hr.; 4x4 model 11 BTU/hr.
· Figures for typical video content are indicative only and will vary.
Approvals
· EU safety: EN 60950
· EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
· US safety: ANSI/UL 60950-1
· Canadian safety: CSA C22.2 No. 60950-1