top of page

Overview

The VC-Grid 15 is a small, 240 x 240 mm LED video module with a 15 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling

  • Wide range of pixel pitches to suit every application
  • Easy cabling, mapping and configuration
  • Bright and fully calibrated for optimal consistency

Features

  • 256 individually controllable pixels
  • 5000 nits of brightness
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input (single cable for power and data input)
  • Combined power/data thru (to daisy-chain multiple VC-Grids)
  • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
  • Custom designs available on request (pixel pitch and module dimensions)

Martin VC-Grid 16x16 15 RGB (sold in multiples of 4) VC-Grid 16x16 15 RGB

$626.03Precio
  • Physical

    Length: 240 mm (9.5 in.)

    Width: 240 mm (9.5 in.)

    Height: 15 mm (0.6 in.)

    Weight: 311 g (0.7 lbs.)

    Including 5 mm (0.2 in.) board-to-board gap

    Control and Programming

    Control options: Martin P3 System Controller via Martin P3

    PowerPort 1500 and/or DMX

    Control modes: Pixel and module

    Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color

    Protocol detection: Automatic

    Setting and addressing: P3 System Controller or RDM-compliant controller

    DMX channels (RGB): 192 (segment mode) or 3 (module mode)

    Color and intensity calibration: Pixel-level

    Firmware update: Via P3 System Controller

    DMX compliance: USITT DMX512-A

    RDM compliance: ANSI/ESTA E1.20

    Control/User Interface

    Device status: Multi-color visual indication

    Device test and reset: Pushbutton to call up local test patterns and reset device

    Optics

    Minimum LED lifetime: 50,000 hours (to >70% luminous output)

    Figure obtained under manufacturer's test conditions.

    Photometric Data

    Pixels: 256 per module

    Luminous intensity, calibrated mode: 5000 Nit

    Luminous intensity, raw mode: 6000 Nit

    Viewing angle: 120° x 120°

    Preliminary data, figures are approximate

    Video Processing

    Brightness control

    Gamma correction and control

    Color temperature control

    Color gamut control

    Calibration processing

    Synchronization

    Construction

    Base: Black FR4 circuit board

    Transparency through module (unmasked area): 0%

    Protection rating: IP20

    RoHS compliant

    Installation

    Mounting: Mounting holes in module

    Orientation: Any

    Maximum number of VC-Grid™ 16x16 15 modules per daisy-chain: 4

    Connections

    Power & data input: 4-pin Molex connector

    Power & data thru: 4-pin Molex connector

    Electrical

    Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500 or external PSU

    Peak power consumption (at full intensity, full white): 60 W

    Typical power consumption (with typical video content): 20 W

    Figures for typical video content are indicative only and will vary.

    Thermal

    Cooling: Convection

    Maximum ambient temperature (Ta max.): 45° C

    Minimum ambient temperature (Ta min.): -20° C

    Peak heat dissipation (calculated, at full intensity, full white): 205 BTU/hr.

    Typical heat dissipation (calculated, with typical video content): 70 BTU/hr.

    Figures for typical video content are indicative only and will vary.

    Approvals

    EU safety: EN 60950

    EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3

    US safety: ANSI/UL 60950-1

    Canadian safety: CSA C22.2 No. 60950-1

    Accessories

    VC-Grid 15/30/60 Mounting Frames, set of 10: P/N 91611560

    Input cables:

    Power+Data Adapter XLR4-PCB, 0.25 m (0.9 ft.): P/N 91616035

    Power+Data Adapter XLR5+Power-XLR4, 0.25 m (0.9 ft.): P/N 91616037

    Power+Data Adapter XLR5+XLR4-XLR4, 0.25 m (0.8 ft.): P/N 91616038

    Power+Data Adapter XLR5+Tripi-XLR4, 0.25 m (0.9 ft.): P/N 91616039

    VC-Grid to VC-Grid link cables:

    Power+Data Cable PCB-PCB, 200 mm (7.9 in.): P/N 91616025

    Power+Data Cable PCB-PCB, 400 mm (15.8 in.): P/N 91616026

    Power+Data Cable PCB-PCB, 600 mm (23.7 in.): P/N 91616027

    Power+Data Cable PCB-PCB, 800 mm (31.5 in.): P/N 91616028

    Power+Data Cable PCB-PCB, 1000 mm (39.4 in.): P/N 91616029

    Extension cables:

    Power+Data Cable XLR4-XLR4, 1 m (3.3 ft.): P/N 91616030

    Power+Data Cable XLR4-XLR4, 2.5 m (8.2 ft.): P/N 91616031

    Power+Data Cable XLR4-XLR4, 5 m (16.4 ft.): P/N 91616032

    Power+Data Cable XLR4-XLR4, 10 m (32.8 ft.): P/N 91616033

    Power+Data Cable XLR4-XLR4, 25 m (82.1 ft.): P/N 91616034

    Output/throughput cables:

    Power+Data Adapter PCB-XLR4, 0.25 m (0.9 ft.): P/N 91616036

    Power+Data Adapter XLR4-XLR5, 0.25 m (0.9 ft.): P/N 91616040

    Cable without connectors:

    Power+Data Cable, Rental, 100 m (328.1 ft.): P/N 91616045

    Power+Data Cable, Install CMX, 100 m (328.1 ft.): P/N 91616060

    Power+Data Cable, Install LSZH, 100 m (328.1 ft.): P/N 91616017

    Related Items

    Martin P3 PowerPort 1500: P/N 90721040

    Martin IP66 PSU 240 W external power supply unit: P/N 90760330

    Martin P3-050 System Controller: P/N 90721090

    Martin P3-150 System Controller: P/N 90721015

    Martin P3-300™ System Controller: P/N 90721060

    Martin P3-PC System Controller: P/N 90721030

    Ordering Information

    VC-Grid™ 16x16 15 RGB: P/N 90357540

bottom of page